23-Oct-2017
ear47mtete|200082B80573|NMIndia18|tblLatestNews|initialtext|0xfcffe73c03000000a903000001000100
- European die casting industry gathers in Nuremberg
- Around 600 exhibitors will showcase innovative solutions
- EUROGUSS pavilion set to make its debut at foundry exhibition in Mexico
EUROGUSS will take place at the Exhibition Centre Nuremberg from
16 to 18 January 2018. With around 600 exhibitors and more than
12,000 visitors expected, it's the leading trade fair for the entire die
casting supply chain, from raw materials through technologies and
processes to finished products. An attractive supporting programme
featuring the International German Die Casting Congress, a finishing
technology pavilion, practical workshops and awards ceremonies for
die-casting competitions for aluminium, zinc, and for the first time,
magnesium, make EUROGUSS the No. 1 gathering for the European
die casting industry. The Nuremberg trade fair experts are also
involved in other die casting events worldwide in 2018: at CHINA
DIECASTING from 18 to 20 July in in Shanghai (China), at Fundiexpo
in Guadalajara, Mexico for the first time from 24 to 26 October, and at
ALUCAST in Delhi, India from 6 to 8 December.
"The preparations for EUROGUSS are going really well,'' says a delighted
Christopher Boss, Exhibition Director at NürnbergMesse.”Around 600
exhibitors - more than ever before - have registered for the event. Many
exhibitors have chosen to have larger stands than they did at the last event.
Naturally, all the market leaders will be out in force again, but we also have
new exhibitors on board. Every last square metre of the three exhibition
halls has been booked, so we are absolutely full. This shows just how
important die casting is for lightweight construction."
Products on display cover the entire die casting supply chain
More than half of EUROGUSS exhibitors are international.
After Germany, the biggest exhibiting nation is Italy, followed by Turkey,
Switzerland, Austria and Spain. Around 38 percent of the exhibitors are die
casting foundries. The remaining exhibitors will be showcasing die casting
technology like machines, peripheral equipment, furnaces, moulds, metals,
alloys, release agents and operating materials. There will also be displays
covering the after-treatment of castings, hardening and surface technology,
quality management, control and drive technology, rapid prototyping and
software. Information on exhibitors and their products is available online at:
www.euroguss.de/exhibitors-products.
The trade visitors to EUROGUSS are mainly decision-makers and users
from the automotive industry, machine and plant engineering companies,
mould making specialists, the electronics industry, energy and medical
technology and die casting foundries. Tickets for EUROGUSS can be
purchased in advance online at: www.euroguss.de/ticketshop.
International German Die Casting Congress in NCC Ost for first time
In 2018, the International German Die Casting Congress, which is very
popular with trade fair visitors, will take place in the directly adjacent and
easily accessible NCC Ost Congress Center. Presentations on the latest
industry issues and developments will be the focus at the established threeday
event. The presentations will be simultaneously translated into English
for the benefit of all international visitors. As of November, the congress
programme can be downloaded from: www.euroguss.de/programme. The
congress is hosted by the Association of German Die Casting Foundries
(VDD) within the German Foundry Association (BDG). Participation in the
congress is included in the trade fair admission price.
New: VDI workshops on hybrid casting, simulation and IT security
For the first time, the Association of German Engineers (VDI) is offering
three special workshops on 15 January 2018, the day before the trade fair.
They will cover the following topics:
- Hybrid casting for automotive construction
- Simulation in foundry technology
- IT security in the foundry sector
On 16 January workshop participants will get the opportunity to take part
free of charge in exclusive guided tours about EUROGUSS including a visit
to the exhibition. For details of the programme and registrations please go
to: www.vdi-wissensforum.de/en.
Finishing technology pavilion in Hall 6
The separate pavilion for the key topic of finishing technology, which
successfully premiered two years ago, will be featured once again in 2018.
The after-treatment and coating of functional and heavy duty castings is an
important issue for casting foundries. Appropriate machines and processing
technologies help give the surfaces of cast products a high-quality
appearance and may involve treatments like deburring, grinding, polishing,
coating or finishing. The finishing pavilion in Hall 6, Stand 6-333 will
showcase companies that offer machining and surface finishing of
lightweight metals.
Competitions for aluminium, zinc and magnesium die cast parts
Once again, there will be plenty of excitement during the opening ceremony
for EUROGUSS on the Monday evening of 16 January 2018, when the
winners of the three competitions for aluminium, zinc and (for the first time)
magnesium die casting will be announced. The host associations1 use
these awards to recognise especially outstanding die cast parts. Their
objective is also to make the public aware of the wide range of applications
General Association of the Aluminium Industry (GDA), Initiative Zink (German
zinc industry network initiative), European Association for Magnesium (EFM) and
the International Magnesium Association (IMA) for aluminium, zinc and magnesium materials and their special properties.
The awards will be presented during the opening ceremony. A detailed
presentation about the winning products will be held during the International
German Die Casting Congress.
German die casting sector looks optimistically to the future
According to the Association of German Die Casting Foundries (VDD),
most German die casting foundries were able to increase their sales and
production volumes in 2016 and 2017. In the first half of 2017, aluminium
die casting was up 7.1 percent to 338,000 metric tons, zinc die casting was
up 10.7 percent to 32,000 metric tons, and magnesium die casting rose by
1.5 percent to 9,100 metric tons. On the client side, the automotive market
is playing an increasingly dominant role, accounting for roughly 70 percent
in the meantime. The remaining 30% of die cast production is distributed
over a large number of different customer segments.
European equipment manufacturers enjoy larger market share in 2016
According to CEMAFON (European Foundry Equipment Suppliers
Association) the value of equipment exported from CEMAFON member
countries increased from EUR 377 million in 2015 to EUR 400 million last
year. This is equivalent to a 7 percent increase in the market share of
CEMAFON members, or around 45 percent of the world market. In 2016,
the world's largest die casting equipment exporter was Italy, followed by
Japan, China, Switzerland and Germany.
First-hand experience of die casting events worldwide
NürnbergMesse Group is reinforcing the position of its successful events at
its home location of Nuremberg by developing worldwide product families.
The company sees itself as paving the way for German and other
European die casting foundries aiming to break into the international
market or wanting to strengthen their global business relationships. The
next event in the EUROGUSS product family is CHINA DIECASTING in
Shanghai from 18 to 20 July 2018, which expects to welcome around 350
exhibitors and 15,000 trade visitors. For the first time, NürnbergMesse
Group will have a pavilion at the leading foundry exhibition Fundiexpo in
Guadalajara, Mexico from 24 to 26 October 2018. Around 170 exhibitors
and 5,000 trade visitors are expected to attend. The next event after that
will be from 6 to 8 December 2018, when ALUCAST in Greater Noida,
Delhi/NCR, India, will open its doors to around 150 exhibitors and more
than 3,500 trade visitors.
Various companies will report on their personal experiences in China,
Mexico and India during EUROGUSS, within the scope of the China,
Mexico and India Days event in NCC Ost. Surveys and market forecasts
will also be presented. In the entrance area to Hall 7A interested parties
can get detailed information about these overseas events. For further
information please visit: www.euroguss.de/international.
Contact for press and media
Katja Feeß, Saskia Viedts
T +49 911 86 06-83 29
F +49 911 86 06-13 83 29
saskia.viedts@nuernbergmesse.de
For all press releases, further information and photos please go to:
www.euroguss.de/en/news
Other services for journalists and media representatives are available at:
www.euroguss.de/press
GO BACK